Description

My mandrel collection.

18 inch mandrels for power winding: 3/32" - 9/32" in 1/128" increments (with one exception - .115" instead of 15/128") , and from 19/64" - 1/2" in 1/64" increments (The 1/2 inch mandrel is a bit longer). Also along the right side runs my metric sizes 2.25mm, 2.5mm, 3.25mm, 4.25mm, 5.25mm, and 6.25mm. These are sizes that don't happen to fall right on, or very close to any imperial sizes.

In the back are 36" mandrels with handles for hand winding in 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", and 3/8".

The two tiny ones at the top on the right are 1/16", and .080".

I also use short sections of .040", .045", 3/64", .048", .057", .064", .065", .072", .075", and 5/64" wire for tiny rings, which are not shown in this picture.

Weave(s) Used (Click to View Weave)

None

Images Tags (Click to Search Gallery)

Tag(s): Crank, Handwind, Mandrel, Powerwind, Storage, Tools, Workspace