Ring Cutting Jig Advice
View previous topic | View next topic >
Post new topic Reply to topic
M.A.I.L. Forum Index -> Knitting Circle
   
Author Message

Joined: March 10, 2018
Posts: 2
Submissions: 0
Location: ID

Ring Cutting Jig Advice
Reply with quote
Posted on Sat Mar 10, 2018 3:47 pm
Link to Post: Link to Post

I'm in the process of building a hauberk from mild steel wire. The rings are about .25" outside diameter. I buy the wire from Home Depot, and have a jig to wind it with. But I'm still cutting all the rings by hand.

I've tried cut off wheels on a Dremel, but they wear out too fast (if they don't shatter).

I've tried looking on YouTube for cutting jig ideas, but have yet to find a video that shows HOW a functional jig is put together, or for one that will cut springs over 6 inches long. I usually wind a spring about 2 1/2 feet long before I cut it.

I still have approximately another 800 feet of wire to cut, so I'm open to suggestions.


Coif Cool Smiley

Truth simply is. Whether you can accept it or not is irrelevant.

https://www.facebook.com/StormsForge/
buckhedges.wixsite.com/buckhedges

Joined: April 02, 2008
Posts: 2276
Submissions: 42
Location: Lincoln, NE

Reply with quote
Posted on Sun Mar 11, 2018 2:32 am
Link to Post: Link to Post

Welcome Buck

If you go to the Library drop down, Gallery and than go to tools you can find some pictures of cutting rigs people have developed.

Here is a link to the tools section of the gallery.

Hope that this helps you find some answers


Once you stop learning, you stop living, so...
Ask questions.
Try new things.
Share what you know.

MailleCode V2.0 T5.3 R4.4 E0.0 Feur MFe.sBr Wg Cwb G.7-5.1 I3.1-11 N20.5 Pj Dcdjt Xa1w2 S08

Joined: January 29, 2005
Posts: 674
Submissions: 0
Location: St. Paul, MN

Reply with quote
Posted on Mon May 28, 2018 7:51 pm
Link to Post: Link to Post

Have you checked out this tool?: www.Ringinator.com

Post new topic Reply to topic
Jump to:  
Page 1 of 1
All times are GMT. The time now is Sun Feb 23, 2020 3:51 am
M.A.I.L. Forum Index -> Knitting Circle
Display posts from previous: