Submitted ByEdit Dates
Date Uploaded: November 12, 2011, 10:24 pm Last Edited: December 29, 2012, 7:44 pm |
 Add toSite Favourites Print this Article |
Fieldstone
Article © MAIL User: Corvus
Fieldstone
You will need rings with an AR of 4 - 4.2 (ish). I am using 1.2mm copper rings 5mm ID (AR of 4.1).
Start by connecting 5 rings together like so:
Push the 5th ring (blue) down between the first 2 (purple) and add a new ring (green), like so:
Add a new ring (pink) with 2 closed rings on it to one side of the blue marked ring, through the green marked one:
Add another ring (marked in pink) to the ring marked in green on the other side of the blue marked ring:
Add a new ring (black) to the rings marked in yellow.
Push the black marked ring down between the 2 rings marked in pink and secure with the ring marked in green that goes through the pink rings and the black ring, in between the yellow marked rings.
Phew hope that made sense. Rinse repeat.
You will need rings with an AR of 4 - 4.2 (ish). I am using 1.2mm copper rings 5mm ID (AR of 4.1).
Start by connecting 5 rings together like so:
Push the 5th ring (blue) down between the first 2 (purple) and add a new ring (green), like so:
Add a new ring (pink) with 2 closed rings on it to one side of the blue marked ring, through the green marked one:
Add another ring (marked in pink) to the ring marked in green on the other side of the blue marked ring:
Add a new ring (black) to the rings marked in yellow.
Push the black marked ring down between the 2 rings marked in pink and secure with the ring marked in green that goes through the pink rings and the black ring, in between the yellow marked rings.
Phew hope that made sense. Rinse repeat.
Original URL: http://www.mailleartisans.org/articles/articledisplay.php?key=565
