You are not Logged In! -- Please consider creating an account. (It's free!)
This is the BETA version of the Articles Library -- Expect occasional bugs -- Report them to Daemon_Lotos => [Here]
[ Articles Home | Newest Articles | Submit an Article ]
[ Random Article | Search Articles ]

Joining Half Persian 4 in 1
Article © MAIL User: Armoured_Raven

After searching everywhere for a tutorial on how to join ends on the HP 4-1 (Half Persian 4 in 1) I decided to go with the wise words, "If you want something done, do it yourself". This proved to be harder than I thought, which is why the rings in the pics are so horribly scratched...but I finally figured the darn thing out, and now I share my experience with you. ^_^

I should also mention that, even with a step by step tutorial, this takes patience and dexterity. If you don't get it right away, just keep trying, you'll get it in time.

(Note: The last two images are mirrored from the first three images. - Ed.)

To start, complete each end, and remove (or don't add) the usual "loose" ring.
Image: 5476hp41j-001a.jpg
The green are all facing the same direction, same with the gold.

Line up the "green" rings and bring a new ring (in this case "red")
down through two green on one side
and up through one green on the other side.
Image: 5476hp41j-001b.jpg

Take another ring ("purple"),
bring it up through two gold on one side
and down through a gold and the red on the other.
Image: 5476hp41j-002a.jpg

Take the first green ring on the right (see pic),
bring it up through one gold ring on the left.
Image: 5476hp41j-003a.jpg
Once you've done that last step, it should look like this:
Image: 5476hp41j-003b.jpg
...and then you're done! ^_^
Original URL: