Submitted ByEdit Dates
Date Uploaded: February 9, 2004, 10:25 pm Last Edited: January 2, 2013, 11:53 am |
 Add toSite Favourites Print this Article |
One Hour Less Sleep Variant A
(CGI)
Article © MAIL User: Zlosk
Weave & Instructions by Zlosk
Materials
One Hour Less Sleep Variant A works best using rings with an aspect ratio around 6.4 (after springback). This works out to:
Steps 1 - 7 require (18) rings.
Each step 8 requires another (8) rings.
Instructions
For this instruction set, new rings are gold and existing rings are silver.
You're done!
Materials
One Hour Less Sleep Variant A works best using rings with an aspect ratio around 6.4 (after springback). This works out to:
- 14 ga. (.080) x .512 (about 1/2) I.D.
- 16 ga. (.062) x .397 (about 3/8) I.D.
- 18 ga. (.045) x .288 (about 1/4) I.D.
- 20 ga. (.032) x .205 (about 3/16) I.D.
- 22 ga. (.025) x .160 (about 5/32) I.D.
- 24 ga. (.020) x .128 (about 1/8) I.D.
Steps 1 - 7 require (18) rings.
Each step 8 requires another (8) rings.
Instructions
For this instruction set, new rings are gold and existing rings are silver.
 | 1. Make a 2-4-2-4 chain. |
 | 2. Move the center rings to the left and scrunch them together as shown. |
 | 3. Add a ring through 6 existing rings. |
 | 4. Add a ring through 6 existing rings (same as step 3, but on the opposite side). |
 | 5. Add a 2-4 chain. Note that the 2 go through 4 existing rings. |
 | 6. Move the center rings to the left and scrunch them together as shown (same as step 2). |
 | 7. Add 2 rings (same as steps 3 and 4). |
| 8. Keep on repeating steps 5 through 7 until the chain is as long as required. |
Original URL: http://www.mailleartisans.org/articles/articledisplay.php?key=118
