You are not Logged In! -- Please consider creating an account. (It's free!)
This is the BETA version of the Articles Library -- Expect occasional bugs -- Report them to Daemon_Lotos => [Here]
[ Articles Home | Newest Articles | Submit an Article ]
[ Random Article | Search Articles ]

European 6 in 1
(CGI; Ribbon)
Article © MAIL User: Bative

Speedweaving European 6 in 1 Instructions

This is a pretty simple variation on the European 4 in 1 weave that makes the weave slightly denser. NOTE: the way this sheet is built, is not the *correct* for maille to hang, if hung the right way (90 degree turn as shown here), it will conform to the body.
The white rings are the newly added rings, The orange rings are ring(s) through which the new ring passes. The green rings are rings already added to the chain.

Step 1: Close six rings.
Image: 6in101.jpg
Step 2: Pass a new ring through these six closed rings, then close the added ring.
Image: 6in1begin.jpg
Step 3: Lay this 'unit' of 6-1 like so:
Image: 6in102.jpg
Step 4: Now, close 2 rings. and lay them both like this underneath the 6-1 unit:
Image: 6in103.jpg
Step 5: Join the 2 closed rings with a single ring, like so:
Image: 6in104.jpg
Step 6: Add a single ring to the last 2 rings on the chain, then add another 2 closed rings to the newly added single ring like so:
Image: 6in105.jpg
Step 7: Continue adding rings until the chain is of desired length.
Image: 6in106.jpg
Step 8: Create 2 of these chains, and lay them next to each other:
Image: 6in107.jpg
Step 9: Add a single ring to join the 2 chains like so:
Image: 6in108.jpg
Step 10: Continue adding rings like in step 9 until the chain is seamed together.
Image: 6in109.jpg

Many thanks to Eli for the generated Pictures!
Original URL: