Submitted ByEdit Dates
Date Uploaded: July 2, 2009, 11:58 pm Last Edited: December 9, 2012, 6:03 pm |
 Add toSite Favourites Print this Article |
Dragon Keychain Tutorial
Article © MAIL User: Derailed
Dragon key chain tutorial by Derailed.
If you want your own pocket dragon as seen here just follow along.
This project is made with 18g 3/16" and 1/8" stainless steel rings, and small anodized aluminum scales.
This guide references a few weaves. The guides for those weaves can be found in the M.A.I.L. library:
E4-1 (European 4 in 1):
European 4 in 1 (Ribbon)
HP3-1 (Half Persian 3 in 1):
Half Persian 3 in 1 (CGI)
Comparison of HP3-1 opposing weaves (left and right):
Half Persian 3 in 1: Right Leaning vs. Left Leaning
Boxchain:
Box Chain (Ring Flip Method)
Byzantine:
Byzantine
Being familiar with these weaves is necessary to follow this guide successfully.
Now let's begin.
Good Luck.
If you want your own pocket dragon as seen here just follow along.
This project is made with 18g 3/16" and 1/8" stainless steel rings, and small anodized aluminum scales.
This guide references a few weaves. The guides for those weaves can be found in the M.A.I.L. library:
E4-1 (European 4 in 1):
European 4 in 1 (Ribbon)
HP3-1 (Half Persian 3 in 1):
Half Persian 3 in 1 (CGI)
Comparison of HP3-1 opposing weaves (left and right):
Half Persian 3 in 1: Right Leaning vs. Left Leaning
Boxchain:
Box Chain (Ring Flip Method)
Byzantine:
Byzantine
Being familiar with these weaves is necessary to follow this guide successfully.
Now let's begin.
Good Luck.
Original URL: http://www.mailleartisans.org/articles/articledisplay.php?key=545
