Date Uploaded: September 1, 2011, 11:44 pm
Last Edited: November 18, 2013, 9:20 pm
Print this Article
Article © MAIL User: lorraine
Step 1. Close two copper rings and overlap them so that they form an eye. Tape them together so that they stay in place and so that you have a tag to hold onto while you begin the weave. The top ring should overlap the bottom ring.
The "eye" of two rings is the space marked in green here.
Step 2. Place a silver ring through the eye of the two copper rings and let it hang down.
Step 3. Place another silver ring through the two copper rings, but this time around the eye. This ring does not go through the previous silver ring, only through the copper rings.
Step 4. Place a copper ring through the eye of the pair of silver rings added in the previous step.
Push this ring up and fold it under the copper ring along the upper edge.
Step 5. Place a second copper ring around the pair of silver rings, this time around the eye. This ring does not go through the first copper ring of the pair, only the silver rings from the previous row.
Step 6. Place a silver ring through the eye of the copper pair from the previous row, and let it hang down.
Step 7. Place a second silver ring through the previous copper pair, around the eye.
Step 8. Continue adding rings following steps 4 through 7. You add rings in pairs, the first one through the eye, the second one around the eye, remembering to switch the direction the first ring lays (up or down) each row.
You made Arkham!
Original URL: http://www.mailleartisans.org/articles/articledisplay.php?key=622