MAIL Header Image M.A.I.L. (Maille Artisans International League) is an international community of artisans and volunteers dedicated to the advancement of the chainmaille artform. We aim to encourage the sharing and spreading of information, archiving as many techniques and weaves as possible.




Byzantine (photos)
Submitted by tipo mastr
Email

Okay, this is a tutorial for a very well-known weave: byzantine. It is using my "speed weaving" method. It isn't exactly speed weaving (that definition varies among how you do it), but it is faster than most ways of building byzantine. In this tutorial, I am using 16 gauge 1/4", but my AR is a bit too high. A good AR is 3.9, it makes it not lay flattish. This is using 2 inner connecting rings. Now, to the tutorial.

Step 1:
First, make a 2-2-2 unit. I am using stainless, copper and brass, for ease of identification. You don't need to, it just helps the explanation process.



Step 2:
Now, fold one of the the brass rings under the steel rings, and one above them, leaving them sticking out somewhat.



Step 3:
Hook a steel ring through the brass rings, but in-between the copper rings. Do NOT close it.



Step 4:
Put two closed brass rings on this open ring. Close the stainless ring.



Step 5:
Double that steel ring, and put two copper rings on those two brass rings. At this point, you are essentially back at step 1.



Step 6:
Like in step 2, fold one of the farthest right rings under the second to the right rings and one above them.



Step 7:
Put a steel ring through the copper rings, and do NOT close it.



Step 8:
Again, put two closed rings on the open one, and close it. Double this steel ring.



Step 9:
Add on two rings to the farthest right rings.



To continue, repeat steps 5-9.

As you can see, 16 gauge 1/4" rings are too loose, causing rings to flop easily, like here.



To rectify this, you could make the two connecting rings 3, like this:



Or use a lower AR:



There are many fun things to do with byzantine, like moebiusing the rings.



or doing a 3 connecter moebius: (yes, I know the picture is a bit fuzzy)



Also try using beads on wire for connecters, or other redundant things.

Have fun with this cool weave!





View Printable Version

Articles Home | New Articles | Submit | Random Article | Search Articles